SUBMERGENCE TEST FOR GUARDIAN CASE
Close your
EMPTY
Guardian Case following the
Opening Directions.
Submerge your Guardian Case for 5 minutes in a depth of water that completely
covers the case .
Do not submerge deeper than 1 meter
Remove the Guardian Case after 5 minutes .
Dry off outside of the Guardian Case
before opening.
Open your Guardian Case checking for any signs of water inside . Do NOT use if water
is present and contact M-Edge customer service .
NOTE:
It is imperative to inspect your Guardian Case regularly. After using your Guardian Case, especially on the beach, rinse
with fresh, mildly soapy water. Perform a submergence test on your Guardian Case after long periods of inactivity.
If your Guardian Case happens to fall and results in extreme impact, we recommend you inspect and test your Guardian
Case again. Your warranty does not protect against impact damage.
CONTINUED ON NEXT PAGE
CONTINUED:
STEPS AND PROCEDURES FOR PROPER CASE FUNCTION
1
2
3
4
1
2
3
4
SECTION I
