Owner’s manual
6
EN
SAFETY INSTRUCTIONS
Read the instruction manual carefully before first use and keep it for future reference.
Producer is not responsible for damages caused by inappropriate handling and use of the
device.
1. Prior to mounting and use, check if the device or its parts have any signs of damage.
2. Do not use this device if it has been damaged or its operation is abnormal.
3. Do not attempt to repair this device yourself. In case of damage, contact with an
authorized service point for check-up/repair.
4. Use only original accessories.
5. The device is suitable for indoor and outdoor use.
6. Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical
agents to clean this product.
7. Keep the device of reach of children. The device is not a toy.
1.
Mounting
1.1 Use the mounting kit to mount the antenna on the flat surface, for example a wall.
Check for proper antenna fastening prior to first use.
2. Hardware connection
2.1 After successful mounting, connect the USB interface of the cord to the PC USB
input.
3. Drivers installation
3.1 Insert a CD (included in the set) into the CD-ROM drive of you PC.
3.2 Proceed according to the on-screen prompts to finish installation process.
4.
Connecting to the wireless network
4.1 After driver installation, click on the wireless network connection icon in the lower
right corner of the task bar.
4.2 Choose the available wireless network and connect to it.
4.3 If the wireless network is secured, enter the security password.
