IU_PulsePRO_04
Page 5 of 24
Pre Setup & Configurations
When a lock is new or reset, a pre-setup mode is activated. In pre-setup mode the lock
can be open simply pressing the button 1. When the bolt is opened, the output on the
connector “BAT” of the lock is activated.
The lock can be set through the keypad with one of the 80 different configurations
which involve among other things the number of the users, the dual openings and the
manager management feature. No PC is requested!
Users properties and default codes
The lock can be set with more than 80 different configurations which involve the number
of the users, the dual openings and the manager management feature.
Each user has his own ID of two digits whereas the code can be composed by 6 figures
or 6 f Dallas key or only Dallas key. If only Dallas key, this user must be
configured in dual opening with other users (only upon request it is possible to configure
opening users as only Dallas key with no dual).
ERC code is always composed by ID + 8 figures.
1
st
Master code, default: 80 - 1 2 3 4 5 6.
2
nd
Master code, default: 81 – 1 2 3 4 5 6 (2
nd
Master is available only in certain
configurations).
Master codes can change its code, change configuration in dual with Manager code and
set time and Date. For some configurations it can also manage the Manager codes.
1
st
Manager code, default: 60 - 1 2 3 4 5 6.
2
nd
Manager code, default 61 – 1 2 3 4 5 6 (2
nd
Manager is available only in certain
configurations).
Manager codes can open, change his code, change configuration in dual with Master
code, manage all the standard and override users, program time delay, audit users and
all lock features. It can’t manage the Master codes.
1
st
ERC code, random code provided: 98 – x x x x x x x x.
2
nd
ERC code, random code provided: 99 – x x x x x x x x.
ERC codes erase all the users and restore the factory codes of Masters and Managers.
Users 01: 01 – x x x x x x; User 02: 02 – x x x x x x ; …..User 59: 59 – x x x x x x.
Depending on which configuration is selected the override users can be one (ID 10) or
up to the ten (ID 50 – ID 59).
Change default codes before operating the lock.
Summary of Contents for Basic line Series
