IU_PulsePRO_04
Page 9 of 24
Open the lock with a standard user
Managers and users open the lock with time delay if enabled.
Enter a valid opening code. Double beep and the lock open.
If time delay enabled, beep and LED flashes at two seconds intervals.
To stop time delay counting press
.
Open window is indicated by beep and LED at 1 second intervals.
During open window, enter combo (or combos if dual mode). Double
beep and lock open.
Open the lock with an override user
Override users open without time delay. Depending on which configuration was
selected, override users can be in dual with Manager and standard users.
Enter a valid override user code. Double beep and the lock open.
If dual opening enabled, LED quickly flashes.
Enter a 2
nd
valid code. Double beep and the lock open.
To stop the dual opening when the LED is flashing, press
.
Change code (function 0)
Press and hold
until double beep. LED remains ON.
Enter the ID + old code. Double beep.
Enter the new code without ID. Double beep.
Confirm the new code without ID. Double beep.
Always perform this operation with the door open and test several times before closing.
Summary of Contents for Basic line Series
