18 of 24
IU_ MiniTech_05_eng
User instructions
MiniTech
Enter the time of start and the ending time for the closing period, then press
to
confirm.
Should the year be set
, the closing period is not repeated.
Should not the year be set
(press
), the closing period is yearly repeated instead.
Press
to delete all values entered.
Repeat the steps above for each closing period.
Closing periods (OFF days) – Verify or delete values
Enter Time Lock menu and press
. LCD shows:
WEEKLY TIME LOCK
SETTING
Press
until the LCD shows:
CLOSING PERIODS
SETTINGS
Press
. LCD shows:
ADD NEW VALUES
Press
. LCD shows:
VERIFY OR DELETE
VALUES
Press
to check the first closing period scheduled.
GG/MM/AAhh:mm
GG/MM/AA hh:mm
Press
to scroll all the scheduled closing periods.
Press
to delete the scheduled closing periods.
DELETE VALUES?
press
to confirm or
to exit.
At the end of the list, press
.
END OF LIST
EXIT?
Opening periods - Add new values
Opening periods are time intervals in which is possible to open the lock even when a time
lock is enabled.
It is possible to schedule up to 60 opening periods. Each one of them has a maximum time
length of 14 days.
Enter Time Lock menu and press
. LCD shows:
WEEKLY TIME LOCK
SETTING
Press
until the LCD shows:
OPENING PERIODS
SETTINGS
Press
. LCD shows:
ADD NEW VALUES
Press
. LCD shows:
GG/MM/AA hh:mm
GG/MM/AA hh:mm
The first one is an opening time while the second one is a closing time.
Summary of Contents for MiniTech
Page 1: ...MiniTech User Instructions...
