m-sur
e.co
.uk
www.m-sure.co.uk - Allendale Group Ltd, Pindar Road, Hoddesdon, Hertfordshire. EN11 0BZ.
Images & Content ©2020 Allendale Group Limited. E&OE - Specifi cations subject to change without prior notice.
M-SURE Digital Scales User Man
ual
•
Before using the Linear Scale for the fi rst time, wipe with a clean cloth ideally soaked with cleaning oil.
•
This M-SURE Linear Scale is a precision measuring instrument. Avoid using excessive force, and treat with care.
•
The fi tted battery is intended for the factory test procedure and therefore may not meet the specifi ed battery life.
•
Avoid exposure to all liquids, excessive humidity or temperature.
•
Avoid exposure to bright sunlight.
•
Never apply voltage on any part of this Linear Scale or electric engrave.
•
Remove the battery if the Scale is not being used for a long period of time.
•
Never use solvents to clean. Only use a soft cloth with cleaning oil.
•
Ensure the Linear Encoder is mounted parallel and in correct alignment to the machine axis.
Precautions
Battery Replacement
(MS-270 Series only)
Linear Digital Scale
0
5
10
15
20
25
30
35
40
45
The Linear Scale must be aligned
parallel to the machine travel. Use a
Dial Gauge or DTI to set parallel.
The travel of the reading head must
also be aligned correctly to the Scale
beam, otherwise damage will occur.
1. Beam clamp
2. Beam
3. Reading head
4. LCD display
5. Function button
6. Battery cover
7. Data output cover
8. Reading head fi xing - M3
Horizontal Type
Vertical Type
Part No: MS-270 & 272 Series
Doc V:
1.0
M-SURE Digital Scales
4
7
3
1
2
2
3
5
7
8
4
6
5
6
8
1
1. Insert the key into the battery cover.
2. Twist to unlock. DO NOT use
excessive force.
6. Insert the replacement battery with
its edge against the side battery contact.
7. Press down on the opposite edge.
3. Lift out the battery cover.
8. Locate the two lugs on the battery
cover with the two slots on the Scale.
Insert the battery cover.
4. Remove the battery.
(A magnet tip tool can
be used)
5. Locate the side spring battery contact.
9. Twist to lock. DO NOT use
excessive force.
1
2
3
4
5
6
7
8
9
