48NAT
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-9433 Rev.8 P. 4 / 8
TERMINAL CONNECTIONS
Connect the unit as in the diagram below or refer to the connection diagram on the side of the unit.
Attach the CJC sensor together with input wiring to the input terminals. The CJC sensor is not interchangeable. Do not
remove No.2 terminal screw so that the CJC sensor does not separate from the unit.
■
EXTERNAL DIMENSIONS unit: mm (inch)
75 (2.95)
103 (4.06)
10 (.39)
18
(.71)
1
3
5
6
7
8
9
10
11
12
13
14
15
16
16–M3 SCREW
TERMINALS
2–M3 SCREWS
CJC SENSOR
(CJM)
144 (5.67)
137.5 (5.41)
4
*
1
(.16)
36 (1.42)
31 (1.22)
0.5 (.02)
100 (3.94)
*
1. Space required when replacing the scale plate.
*
2. Attach the CJC sensor together with input wiring to the input terminals.
The CJC sensor is not interchangeable. Never remove the screw at terminal 2 so that CJC sensor can be fixed with the unit.
*
3. Used for the existing panel cutout of M-System 48 Series (38 × 139.5 mm).
*
4. Used for the existing DIN panel cutout (33 × 138 mm)
*
5. Used for the existing panel cutout of Fuji Electric PAJ, PAK, PBA (44 × 138 mm), etc.
2
4
*
2
Rounded corners for the option /D
■
OPTION /D BEZEL
*
4
■
STANDARD BEZEL
*
3
10.4
(.41)
7.5
(.30)
3.9
(.15)
136.5 (5.37)
144 (5.67)
11.4
(.45)
7.5
(.30)
4.9
(.19)
136.5 (5.37)
144 (5.67)
8.5
(.33)
10.4
(.41)
7.5
(.30)
136.5 (5.37)
144 (5.67)
■
OPTION /F BEZEL
*
5