32
DL8 USERS
MANUAL EM-7691-B Rev.24
(3) Choose “Modbus/TCP” under “CH setting” and enter “Save No.,” “Modbus/TCP register type,” and “Modbus/TCP register
address.”
1. Select “Modbus/TCP”
2. Enter “Modbus/TCP slave No.,”
“Modbus/TCP register type” and
“Modbus/TCP register address”
PARAMETER
DESCRIPTION
Slave No.
Enter slave No. (0 to 11) set in (1).
Modbus/TCP register type
Choose [Input Register (3X)] or [Holding Register (4X)].
Modbus/TCP register address Set register address usable in the register type described above.
Range: 1 to 65536
