64
DL8 USERS
MANUAL EM-7691-B Rev.24
7.5.1.4 ASSIGNING ANALOG OUTPUT TO DO
(1) Open “DO” configuration dialog.
Input/Output
Discrete output (DO)
DO Configuration dialog
2.Double-click
1.Click
(2) Set “CH setting” to “AO.” Enter AO channel No. to be assigned in “AO CH No.” and AO bit assignment in “AO BIT” (0 to
15) to be identified as ON status. Refer to 7.6 ANALOG OUTPUT (AO).
1. Select “AO”
2. Enter “AO CH No.”
and “AO BIT”
