54
DL8 USERS
MANUAL EM-7691-B Rev.24
7.4.2 BASIC SETTING
After channel assignment, configure basic settings for each channel. Click [OK] to temporarily save the settings.
1.Click
PARAMETER
DESCRIPTION
CH name
Enter the name for channel (max. 32 characters).
CH comment
Enter comment regarding channel and tag name (max. 64 characters).
Scaling
Set weight per one pulse in a numerical number.
(-10,000,000,000 to 10,000,000,000)
Number of decimal places
Set the number of decimal places of the value displayed on the web browser.
Selectable within 0 to 3.
Engineering unit
Set the engineering unit of the engineering unit value set in Scaling.
(max. 16 characters)
Reset input
The counter can be reset at the timing of rising edge of a discrete input (DI).
When this function is not used, set it to [Disable]. To enable the function, select a DI from
the pull-down list.
