JC-CU
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-9042 Rev.1 P. 4 / 6
MOUNTING INSTRUCTIONS
■
DIN RAIL MOUNTING
•
Mounting
1) Set the upper hook at the rear side of the module on the
DIN rail.
2) Push in the lower.
1
2
•
Dismounting
1) Push down the DIN rail mounter slider with tip of a
minus screwdriver.
2) Pull the lower of the module.
3) Remove the upper hook of the module from the DIN rail.
1
2
3
■
SURFACE MOUNTING
1) Insert the DIN rail mounter slider until it clicks once, as
shown below.
1
2) Mount the module with M4 screws referring the Exter-
nal Dimensions. (Torque: 1.4 N·m)
EXTERNAL DIMENSIONS
module: mm (inch)
50(1.97)
[3(.12)]
11
5(4.52)
[4 (.1
8)]
[4 (.1
8)]
[7 (.28)]
[7 (.28)
]
[4(.16)]
73(2.87)
55(2.17)
DIN RAIL
(35 mm wide)
2–4.3 (.17) dia Mtg Hole
4 (.16) deep
