M6DBS
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-7845 Rev.6 P. 2 / 4
INSTALLATION
unit: mm (inch)
■
MOUNTING DIRECTION
The unit must be mounted on a vertical panel. Mounting
in any other angle will cause internal temperature to rise,
may shorten the product’s life expectation or deteriorate its
performance.
Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.)
M6DBS
Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.)
10
(.39)
10
(.39)
14
(.55)
40 (1.6)
■
DIN RAIL MOUNTING
DIN Rail
(35 mm wide)
DIN Rail Adaptor
Set the base so that its DIN
rail adaptor is at the bottom.
Pull down the adaptors. Posi-
tion the upper hook at the rear
side of the base on the DIN rail
and push back the adaptors
into the original position.
■
SURFACE MOUNTING
3-M4
• M6DBS-08A
24.4 (.96)
24.4 (.96)
11.8 (.46)
n-M4
*
1
• M6DBS-08A + M6DBS-08P
• M6DBS-08
• M6DBS-08 + M6DBS-08P
3-M4
n-M4
*
1
11.8
(.46)
37 (1.46)
37 (1.46)
37 (1.46)
37 (1.46)
70 (2.76)
70 (2.76)
70 (2.76)
70 (2.76)
37 (1.46)
37 (1.46)
14 (.55)
14 (.55)
14 (.55)
14 (.55)
*1. n = (Number of bases) x 3
