M6SBS
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-7985 Rev.4 P. 3 / 4
■
HOW TO MOUNT SIGNAL CONDITIONERS
1) Remove the connector cover (A) at the bottom of the sig-
nal conditioner.
2) Align its concave portion (B) with the convex portion of
the base.
3) Push in the unit until its lower part (C) is firmly secured
on the base by the DIN rail adaptor.
C
B
A
■
HOW TO REMOVE SIGNAL CONDITIONERS
Pull out the unit while pushing down the DIN rail adaptor
with a minus screwdriver.
■
HOW TO ATTACH AN EXTENSION BASE
1) Remove the connector cover at the right side of the exist-
ing base and put it on the connector of the extension base.
2) Push the extension base into the right end of the existing
base.
Existing Base
Extension Base
■
HOW TO DETACH AN EXTENSION BASE
Pull out the extension base while pushing the hooks at the
top and the bottom.
