52
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time:
Action
Control panel
Display
To select a heating zone
Press on key [ + ]
[ 4 ]
To select the power level
Press on key [ + ] or [ - ]
[ 1 ] to [ 9 ]
To select the « Timer »
Press on timer key [ - ] and [ + ]
timer control light is on
simultaneously until the
desired heating zone.
Decrease the time
Press on timer key [ - ]
[30] wents to 29,28..
Increase the time
Press on timer key [ + ]
the time i
ncreases…
The time is confirmed and the cooking starts until the time reaches [ 00 ].
To stop the cooking time:
Action
Control panel
Display
To select the « Timer »
Press on timer key [ + ] and [ - ]
Simultaneously until the desired
heating zone
The time displays
To stop the « Timer »
Press on timer key [ - ]
displays [01]
Press second time on timer key [ - ]
displays [00]
If several timers are activated repeat the process.
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound
rings and the heating zone stops.
To stop the sound and the blinking it is enough to press the key [ - ] or [ + ] from the timer.
Egg timer function:
Action
Control panel
Display
To start:
Touch the key [ 0/I ]
[ 0 ]
To select the “Egg Timer”
Press once on timer key
[ - ] and [ + ] simultaneously
The time displays
Decrease the time
Press on timer key [ - ]
[30] wents to 29,28,27,
Increase the time
Press on timer key [ + ]
the time increases…
When the time reaches [00] it is blinking and beeping.
Function “keep warm”
This function of maintenance to the heat makes it possible to reach and maintain automatically a
temperature of 42°C and 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
To engage, to start the function “ keep warm “
Action
Control panel
Display
To engage 42°C
Press [ U ] key
keep warm control light
is on
To engage 70°C
Press [ U ] key 2 times
keep warm control light
is blinking
To select the desired
Press key [ + ] or [ - ]
[ u ] or [ U ]
from the heating zone
To stop the function
Press key [ + ] or [ - ]
[ 0 ] to [ 9 ]
This function can be started independently on all the heating zone.
Whe
n the pan leaves the zone of cooking the “keep warm” function remains active during
approximately 10 minutes.
The maximum duration of maintenance to the heat is 2 hours.
