Continue pressing “
” button; it will display from 13;14… until
23. When LCD shows 23; it doesn’t work by pressing “
”
button. Press “
” button once; the number reduces by 01. When
LCD shows 00; it doesn’t work by pressing “
” button. After
setting hour; you can start setting minute by pressing “ ” button
again.
on LCD flashes; which represents minutes. Press “
”
button once the number adds by 01. Continue pressing “
”
button; it will display from 01;02… until 59. When LCD shows
59; it doesn’t work by pressing “
” button. Press “
” button
once; the number reduces by 01. When LCD shows 00; it doesn’t
work by pressing “
” button. After setting hour and minute;
press “ ”
to confirm.
When “
” button doesn’t work;
“ ” button is used for delay timer
function. Delay timer function allows you to set the hoods
automatically power off according to the delay timer you set from 1
minute to 60 minutes. Press “ ” button once; it enters for delay
timer setting and LCD shows
.
Press “
” button once the
number adds by 01.
Continue pressing “
” button; it will display
from
;
;
… until
Press “
”
button once; the number reduces by 01. After setting delay timer you
want; press “ ” button to confirm. If you set delay timer as 05:00;
the LCD display will show from 05:00; 04:59… until 00:01 00:00.
When LCD shows 00:00; the hood will automatically power off and
LCD display will only show 24-hour system with blue backlight.
After 30 seconds without operation; blue backlight will disappear.
But please note the Lamp is not under control of delay timer. Next
time; if you want to use delay timer function and you press “ ”
button without any change on time. The hood will automatically
count time down from your previous setting after 5 seconds.
10
Summary of Contents for MSK-650
