LCD Touch control
Pic 8
1. Power on: Switch on the power supply, and the backlight is lit,
displaying “24-hour system”. The output is then blocked up,and
the soot machine enters standby status. The backlight disappear
automatically 30 seconds later under the condition of none
operation.
2. Press “Indicator” key: Press the indicator key once, the indicator
is lit, and on the LCD screen is lit. Press it for a second time,
of the indicator and the LCD screen will distinguish and it
will be repeated again and again.
3. Power on position and increase key , the motor is provided
with three positions, i.e. low, medium and high.
1.Press key once, the is displayed on the display screen,
and the motor starts operation. The is the low position
(power on position.)
2.Press key once more at the low position, the
is
displayed on the display screen, and the
is the medium
position.
3.Press key once more at the medium position, the
is
displayed on the display screen, and the
is the high
position.
4.Go on pressing key at the high position, the
is still
displayed on the display screen, and the motor works
normally. It is still at high position at this time.
4. Power on position and decrease key “ ”
1.Press “ ” key once, the motor is adjusted to a lower position,
and the LCD screen displays that position in the meantime;
1
1
Summary of Contents for MSK-650
