R7L-DAC16
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-7804-S Rev.9 P. 5 / 21
DEVICE INTERFACE FILE
Device Interface File (XIF) is used to define a L
ON
W
ORKS
device when programmed on LonMaker.
For this module, the following file is used:
R7L-DAC16v113.XIF
The XIF files are downloadable at M-System’s web site: http://www.m-system.co.jp
FUNCTIONAL BLOCKS
■
NodeObject
NodeObject (Object ID : 0)
nv 0
nviRequest
SNVT_obj_request
nv 1
nvoStatus
SNVT_obj_status
nv 2
nvoFileDirectory
SNVT_address
nv 3
nvoABNLCond
SNVT_state
SCPTdirection
SCPTmaxSendTime[ ]
SCPTminSendTime[ ]
SCPTlocation
SCPToemType
SCPTserialNumber
Extension module setting
Maximum sending time (per fb)
Minimum sending time (per fb)
Set Tag No. (name)
Indicate Model No. and Version
Indicate Serial No.
NodeObject :
Network Variables
Configuration Properties
• Network Variables
NETWORK
VARIABLE
TYPE
{ Range }
{ Default }
EXPLANATIONS
nviRequest
{SNVT_obj_request}
For use with LonMaker and other tools.
nvoStatus
{SNVT_obj_status}
For use with LonMaker and other tools.
nvoFileDirectory {SNVT_address}
For use with LonMaker and other tools.
Required to get access to Configuration Properties.
nvoABNLCond
{SNVT_state}
Shows the device status (All 0s in normal conditions).
Bit 0 through Bit 9 : Invalid
Bit 10 : E
2
PROM Configuration Property check sum error
Bit 11 : E
2
PROM Count data check sum error
(Bit 10 and Bit 11 can be reset to 0 by RQ_CLEAR_STATUS against NodeObject.)
Bit 12 through Bit 15 : Invalid
