FFD 3.5
"
SCSI Flash Disk User Manual
45-SR-001-01-7L REV 4.0
3 of 22
1 General
This manual provides you with the information you need to properly install your new FFD 3.5
"
SCSI
Flash drive. M-Systems recommends that only properly qualified and trained personnel install the
drive.
The following sections contain information about handling, mounting considerations, address and
configuration setups, cabling and connectors, and how to obtain technical assistance and service. In
addition, Section
10
provides answers to common questions regarding SCSI devices.
Note: Remember to always back up your data before adding disk drives to your system!
2 Kit
Contents
Ensure that your kit contains the following items:
•
FFD 3.5
"
SCSI Flash Disk. (Throughout the remainder of this document the FFD 3.5
"
SCSI Flash
Disk will be referred to as FFD).
•
4 mounting screws, M-Systems part no. 01-SC-034-00.
If any items are missing, please contact your dealer.
3 Visual
Inspection
Before unpacking or handling a drive, take all proper electrostatic discharge (ESD) precautions,
including personnel and equipment grounding. Before you begin installing the FFD into your system,
verify the following:
•
If the shipping container appears to be damaged or water-stained, notify your dealer.
•
Remove the disk from its shipping enclosure and inspect it for any damage that may have
occurred during shipment. If any damage is observed, notify your dealer.
•
Record the disk serial number and shipment date.
•
Retain the original shipping enclosure and all packing material for reshipment.
