Locomotive Light Bulb Replacement
To replace the burned out light bulbs on this locomotive, remove the body from the
chassis by removing the body mount screws shown below. Please note it may be
necessary to remove the truck side frame details in order to gain full access to some
body mount screws.
Once the body is removed, locate the burned out light bulb(s).
Carefully remove bulb(s) from mounting. Disconnect light bulb harness from main
harness wire.
Replacement bulb harnesses are available directly from the M.T.H. Parts department.
(Order online: www.mth-railking.com, e-mail: parts@mth-railking.com,Fax: 410-
423-0009, Phone: 410-381-2500, Mail: 7020 Columbia Gateway Drive, Columbia
MD 21046-1532, ).
Connect replacement bulb harness and reassemble in reverse.
Premier E33 Electric Engine with PS-2
13
Body Mount Screws
Body Removal Screw Locations
Body Mount Screws