®
Proto-Sound 3.0
Volume Adjustment
Knob
Figure 10: Manually Adjusting the Volume
®
Proto-Sound 3.0 features are activated by
sequences of Bell and Horn button pushes
described below. Please read the full
descriptions of each feature before using it.
To use these buttons to activate features
rather than to blow the horn or ring the bell,
you should tap the buttons very quickly with a
½-second pause between button presses. You
may need to practice your timing to make this
work smoothly.
Timing Chart
Total Time Lapse: 1
Seconds
½
Press
Horn
Short &
Firm
½ Sec.
Pause
½ Sec.
Pause
Press
Bell
Short &
Firm
Press
Bell
Short &
Firm
Feature to Be Activated
Button Code:
Road/Push
PFA (Passenger/Freight Announcements)
Fire the Rear Coupler
Fire the Front Coupler
Speed Control On/Off
Lock into a Direction
Road/Pull
Reset to Factory Defaults
1 Bell, 1 Horn/Whistles
1 Bell, 2 Horn/Whistles
1 Bell, 3 Horn/Whistles
1 Bell, 4 Horn/Whistles
1 Horn/Whistle, 2 Bells (from Neutral only)
1 Horn/Whistle, 3 Bells
1 Horn/Whistle, 4 Bells
1 Horn/Whistle, 5 Bells (from Neutral only)
By default your engine’s lights will look like those above. This is the Road setting. To
toggle between Road and Push service using your AC transformer, follow the Bell/
Whistle instructions below.
PUSH/ROAD
Rear
Premier E94 Crocodile Electric Engine
12
Red
Rear
ENGINE IN FORWARD
ENGINE IN REVERSE
Red
The MTH E94 Crocodile has four operating light settings or modes:
• Road
Push
Pull
Yard
In each of these operating modes the lights follow the actual prototype engine.
To switch between the different modes please follow the instructions below.
•
•
•
ROAD