14
Premier Genesis Diesel Engine
2. Slip the new tire onto the wheel. You may find it useful to use two small
flathead screwdrivers to stretch the tire over the wheel.
3. If you twist the tire while stretching it over the wheel, you will need to
remove and reinstall the tire. Otherwise your engine will wobble while
operating.
4. Make sure the tire is fully seated inside the groove. Use a razor blade to trim
away any excess tire that will not seat inside the groove properly.
5. Reassemble in the reverse order.
One set of replacement tires is packaged with your model. Additional sets are
available directly from the M.T.H. Parts Department (phone: 410-381-2580;
e-mail: parts@mth-railking.com; mail: 7020 Columbia Gateway Drive,
Columbia MD 21046-1532).
Headlight Replacement Instructions
The locomotive’s headlight is controlled by a constant voltage circuit in the
engine. The headlight is easy to remove and replace when it burns out. The
bulb has a quick disconnect plug that attaches the bulb harness to a light
circuit. Replacement bulbs are available directly from the M.T.H. Parts
Department.
Follow the body removal instructions found in the Lubrication and Greasing
Instructions.
Gently disconnect the bulb harness from the socket on the constant voltage
circuit and replace the bulb.
front
rear
constant voltage
board
constant voltage
board
Replaceable Lights
Replaceable Lights
Figure 8. Locations of Replacable Lights
