EN
08
SUPER ROBUST USER MANUAL
Getting started
You need to insert the SIM card and charge the battery before using the
phone.
Battery use
To extend the battery life of your device:
1. Use the standard wall charger to charge the battery for the first time.
2. During the first 3-4 charge cycles, charge the battery until the battery
indicator on the display stops scrolling.
3. Avoid partial charging. Also, wait for the battery to discharge
completely before charging it again.
4. Charge the battery using the USB cable only if the recommended wall
charger isn’t readily available.
5. Avoid keeping the device on vibrate mode.
Installing the battery
1.Mobile phones with built –in battery can by professional maintenance
engineers replacement. If using the wrong type of battery, may explode.
Please be sure to according to the manufacturer's instructions to handle
used batteries.
2.Replace the battery. Align the contacts of the battery with the
corresponding connectors in the battery compartment.
Charge the battery
To charge the device battery:
1. Take the USB cable from the device packaging, and attach it to
power adapter. Now connect the power adapter into a standard AC
wall outlet.
2. Connect the micro USB connector on the cable into its designated
port on the device (left side). The battery level indicator on the device
screen will start scrolling horizontally to indicate that the battery is
being charged.
NOTE:
Exercise extreme caution while connecting the charger to the
device. The connectors on the charger and on the phone may get
damaged if too much force is applied while connecting them. If the
battery is completely discharged, it may take a while before the on-
screen charging indicator starts scrolling.
3. When the battery is fully charged, the battery level indicator on the
device screen will stop scrolling horizontally. Once charging is
complete, disconnect the charger from the device, and then from the \
wall outlet.
EN