background image

ME401-2 

 

 

 

M-Tec ME401-2, Technical Manual v.1.3a, September 2012 

  Page 3 

Corporate Office 
 

M-Tec A/S 
Industrivej 10 
9490 Pandrup 
Denmark. 

www.m-tec.dk 
www.trackunit.com 
 

Copyright and Trademarks 

© 1998-2011, M-Tec A/S. All rights reserved. M-Tec, the red 
M hyphen TEC logo, Trackunit and Trackunit Pro are 
trademarks of M-Tec A/S, registered in the United States and 
in other countries. All other trademarks are the property of 
their respective owners.  
 

Release Notice 

This document is release 1.3 of the ME401-2, Technical 
Manual. 
 

THIS MANUAL IS INTENDED FOR USE BY SYSTEM 
INTEGRATORS, SERVICE PROVIDERS AND 
APPLICATION DEVELOPERS (COLLECTIVELY, 
“RESELLERS”). IT IS NOT INTENDED FOR END-USERS 
OF THE ME401. ANY END-USER DOCUMENTATION IS 
TO BE PREPARED AND FURNISHED BY THE 
RESELLERS. 

 
The following Product Limited Warranty gives Resellers 
specific legal rights. You may have others, which vary from 
state/jurisdiction to state/jurisdiction. 
 

Product Limited Warranty 

Subject to the terms and conditions set forth herein, M-Tec 
A/S (

“M-Tec”

) makes the following warranty only to its 

Resellers who purchase the ME401 hardware product 
(

“Product”

) directly from M-Tec: for a period of one (1) 

year from the date of shipment from M-Tec, the Product will 
substantially conform to M-Tec’s standard published 
specifications for the Product and the Product hardware will 
be substantially free from defects in materials and 
workmanship. The foregoing warranty shall not apply to 
embedded software/firmware components. 
 

THIS PRODUCT LIMITED WARRANTY IS PROVIDED TO 
RESELLERS AND TO RESELLERS ONLY.  RESELLER IS 
SOLELY RESPONSIBLE FOR ANY AND ALL 
WARRANTIES MADE TO ITS CUSTOMERS, AND M-TEC 
MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND 
SHALL HAVE NO OBLIGATIONS OR LIABILITY TO 
RESELLER’S CUSTOMERS OR END-USERS OF THE 
PRODUCT. RESELLER SHALL NOT 
MAKE ANY REPRESENTATIONS OR WARRANTIES ON 
M-TEC’S BEHALF, AND SHALL FULLY INDEMNIFY, 
DEFEND AND HOLD M-TEC HARMLESS FROM ANY 
BREACH OF THE FOREGOING. IF RESELLER 
DISTRIBUTES PRODUCT TO END-USER CUSTOMERS, 
RESELLER SHALL BE SOLELY RESPONSIBLE FOR 
PREPARING AND PROVIDING PRODUCT WARRANTIES 
AND PRODUCT LITERATURE TO END-USERS.

 

 
 

Warranty Remedies 

If the Product fails during the warranty period for reasons 
covered by this Product Limited Warranty and Reseller 
notifies M-Tec of such failure during the warranty period, M-

Tec at is option will repair OR replace the nonconforming 
Product, OR refund the purchase price paid by Reseller for 
the Product, provided that Reseller returns the Product to M-
Tec in accordance with M-Tec’s standard return material 
authorization procedures or as otherwise instructed by M-
Tec. 
 

Warranty Exclusions and Disclaimers 

The foregoing Product Limited Warranty shall only apply in 
the event and to the extent that (i) the Product is properly and 
correctly installed, configured, interfaced, maintained, stored 
and operated in accordance with M-Tec’s specifications, and 
(ii) the Product is not modified or misused. This Product 
Limited Warranty shall not apply to, and M-Tec shall not be 
responsible for, defects or performance problems resulting 
from: (a) the combination or utilization of the Product with 
hardware or software products, information, data, systems, 
interfaces, services or devices not made, supplied or specified 
by M-Tec; (b) the operation of the Product under any 
specifications other than, or in addition to, M-Tec’s standard 
published specifications for the Product; (c) the unauthorized 
installation, modification or use of the Product; (d) damage 
caused by: accident, lightning or other electrical discharge, 
water immersion or spray, or exposure to environmental 
conditions for which the Product is not intended; or (e) 
normal wear and tear on consumable parts, including by way 
of example and without limitation, batteries. 
 

M-TEC DOES NOT WARRANT OR GUARANTEE THE 
RESULTS OBTAINED THROUGH THE USE OF THE 
PRODUCT. THE FOREGOING TERMS OF THE PRODUCT 
LIMITED WARRANTY STATE M-TEC’S ENTIRE 
LIABILITY, AND RESELLER’S EXCLUSIVE REMEDIES, 
RELATING TO THE USE AND PERFORMANCE OF THE 
PRODUCT EXCEPT AS OTHERWISE EXPRESSLY 
PROVIDED FOR IN THIS PRODUCT LIMITED 
WARRANTY, THE PRODUCT, ACCOMPANYING 
DOCUMENTATION AND MATERIALS, AND/OR ANY 
EMBEDDED SOFTWARE/FIRMWARE AND UPDATES 
THERETO ARE PROVIDED “AS-IS” AND WITHOUT 
EXPRESS OR IMPLIED WARRANTIES OF ANY KIND, BY 
EITHER M-TEC OR ANYONE WHO HAS BEEN INVOLVED 
IN ITS CREATION, PRODUCTION, INSTALLATION OR 
DISTRIBUTION, INCLUDING, BUT NOT LIMITED TO, 
THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE, TITLE 
AND NONINFRINGEMENT. THE STATED EXPRESS 
WARRANTIES ARE IN LIEU OF ALL OBLIGATIONS OR 
LIABILITIES ON THE PART OF M-TEC ARISING OUT 
OF, OR IN CONNECTION WITH, THE PRODUCT. 
WITHOUT LIMITING THE GENERALITY OF THE 
FOREGOING: 
M-TEC IS NOT RESPONSIBLE FOR THE OPERATION OR 
FAILURE OF OPERATION OF GPS SATELLITES OR 
WIRELESS SERVICE OR THE AVAILABILITY OF GPS 
SATELLITE SIGNALS OR WIRELESS SERVICE. THE 
PRODUCT MAY CONTAIN TECHNOLOGY THAT IS NOT 
FAULT TOLERANT AND IS NOT DESIGNED, 
MANUFACTURED OR INTENDED FOR USE IN 
ENVIRONMENTS OR APPLICATIONS IN WHICH THE 
FAILURE OF THE PRODUCT WOULD LEAD TO DEATH, 
PERSONAL INJURY OR SEVERE PHYSICAL OR 
ENVIRONMENTAL DAMAGE OR SEVERE FINANCIAL 
LOSS. ANY USE OR DISTRIBUTION BY RESELLER OR 
ITS CUSTOMERS IN CONNECTION WITH ANY SUCH 

Summary of Contents for ME 401-2
























Reviews: