ME401-2
M-Tec ME401-2, Technical Manual v.1.3a, September 2012
Page 8
For Vehicles Equipped with an Airbag
An airbag inflates with great force. DO NOT place objects, including the ME401 unit, in the
area over the airbag or in the airbag deployment area. If in vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
Specific Absorption Rates (SAR)
THE ME401 UNIT IS NOT DESIGNED TO BE WORN ON A PERSON’S BODY.
AS SUCH, BODY WORN TEST POSITIONS FOR THE ME401 UNIT
ARE NOT REQUIRED BY EITHER THE EN50360/1 FOR GSM 900/1800 BANDS OR
FCC REQUIREMENTS FOR GSM 850/1900 BANDS
.
The ME401 unit is not intended for handheld use or to be worn on the body. A minimum
separation of ten (2”) inches (5 cm) is to be maintained between the ME401 and any
persons’ body. Additional information on Specific Absorption Rates (SAR) can be found on
the Cellular Telecommunications & Internet Association (CTIA) Web site at
www.ctia.org.
Battery Safety Information
Adhere to the following guidelines to avoid the risk of fire or explosion:
1. Dispose of the used battery according to the instructions provided with the battery.
2. Do not drop, puncture, disassemble, mutilate, or incinerate the battery.
3. Touching both terminals of a battery with a metal object will short circuit the battery. Do
not carry batteries loosely if the contacts may touch coins, keys, and other metal objects
(such as in pockets or bags).
4. Do not stack batteries taken out of the carry case.
5. Do not heat the batteries to try to rejuvenate their charge.
6. Do not exceed the temperature ranges or other environmental conditions specified by
the battery manufacturer.
7. Never use the ME401 without the battery cover installed.
