20
Directory
The Directory is an organized list of (up to 10) MMSI numbers stored
on the DSC calling directory.
Storing/Editing MMSI Data
To store a new MMSI in an unused location, follow these steps:
1. Press the
CALL
key to display
LAST
.
Use
the
Selector
to select
DIR
.
The
DIR
ANNUNCIATOR
blinks.
2. Press the
CALL
key. The
ID
ANNUNCIATOR
starts to blink
ON/OFF
, indi-
cating the directory
EDIT
MODE
is activated.
3. Use the
Selector
to select an unused location. If the number location
is full,
FL
is displayed. If the location is available,
CL
appears on the
screen.
4. Select the
CL
location and press the
MEM
key to advance to the
MMSI input screen.
5. Press the
Selector
to enter the MMSI digits. After entering the first
MMSI digit, press the
MEM
key to enter the second number. The big
digit, again starts at
"0"
and the small digit now displays
“2”
The small
number will increase each time you add a MMSI digit. Use the
Selector
to set the second MMSI digit and touch the
MEM
key to store. Repeat
the operation until all 9 digits have been entered and verified. After
entering the MMSI, review each digit by pressing the
MEM
key. If there
is a mistake, press the
16/9
key to exit or just turn off the radio. The
MMSI will not be stored. After you are satisfied with your MMSI entry,
hold down the
CALL
key for 5 seconds to store the number.
6. Press the
16/9
key to revert to the main screen.
DIR and ID
blink to
show Edit
mode
No. 3
is full
No. 4 is empty
and usable
