MT-550
25
•
Push the
SELECT/ENT
knob or
ENT
to move the blinking cursor to the next
character in the Longitude entry.
•
Use the
SELECT/ENT
knob or the microphone keys 0~9 to enter the correct
Longitude value in degrees, minutes and seconds. When Longitude is
complete, the cursor moves to the Time entry line.
•
Push the
SELECT/ENT
knob or
ENT
to move the blinking cursor to the first
character in the Time entry.
•
Use the
SELECT/ENT
knob or the microphone keys 0~9 to enter the correct
time of day.
LOC
appears at the end of the Time line indicating entry must
be local time.
•
Enter your local time in hours and minutes. Use 12 hour AM/PM format if
a
or
p
appear after the minutes characters. The
SELECT/ENT
knob or the
microphone keys 0~9 toggle the
a
/
p
setting. If neither
a
or
p
appear in the
Time line, enter your local time, hours and minutes, in 24 hour format.
•
When Lat/Lon and Time values are correct, press and hold the
CALL
key to
return to the
MANUAL LL
menu page.
To turn Manual Lat/Lon On or Off:
•
Use the
SELECT/ENT
knob to select either On or Off on the
MANUAL LL
page.
•
Push the
SELECT/ENT
knob to store the selection.
•
Press the
16
key. The Main display appears. If Manual Lat/Lon is
turned On, and manually entered values are stored, the Lat/Lon values
appear in the lower two lines of the display. The
M
appearing at the end of
the Longitude line indicates that Manual Lat/Lon is turned On. When Manual
Lat/Lon is turned On, the manually entered position overrides any Lat/Lon
position from a navigation receiver.
MMSID SET
Provides for entry of the 9 digit MMSI for your vessel which must be entered in order
to make DSC calls. MMSI must be obtained from government communication
authorities or authorized agents.
CAUTION NOTE
Only one entry attempt is permitted. A warning is displayed after the first attempt
and MMSID entry is blocked. CALL YOUR DEALER FOR ASSISTANCE.
To enter your MMSI number:
•
Press and hold the
CALL
key. Menu topics appear in the display.
•
Use the
SELECT/ENT
knob to position the cursor on the
MMSID SET
topic.
•
Push the
SELECT/ENT
knob. The
MMSID TYPE
menu appears in the
display.
