*Attention: Please check the filter every half month, to make sure there
is no water inside. If not, click start button and then click the bottom of
the glass jar to discharge water.
3.Operation
1) Before Working:
Step1:
Plug in and open the power switch, clockwise rotate the red
emergency stop button half-circle until it automatic pop-up. After that,
the laminating function can be worked normally. Click this button to
stop work for emergency.
*Attention: The red emergency stop button only control laminating
function.
Step 2:
Check setting on the screen: Laminating temperature: 40
℃;
Vacuum time: 30s; Laminating time: 30s; Defoaming temperature: 40
℃.
*Attention: This is factory settings, please don’t adjust it by yourself.
