M-View OnCall Wi-Fi Pro, User Manual

Camera System Settings

Power Off:

Automatic power off mode when camera is not in use:

Off, 3 min, 5 min, 10 min, Now.

Recommended setting is Off for general use.

Pre-Recording:

 If Pre-Recording mode is activated the 

camera will continuously record while powered on. When 
the Video Record button is pressed, the 3 minutes prior to 
the button press will be captured without audio. The 

recording file chunk length will now become 3 minutes, 

overriding the Recording Chunk Time setting.

Reset Camera Settings:

 Return all settings to factory default

LED Light and Haptic Settings

: Toggle on or off all 

notification lights, sounds, and haptic feedback (vibration). 

A

pply on camera will apply the changes to the camera 

settings and shut the camera down. When camera restarts 
the new settings are applied.

Access Point Settings

This menu allows you to change the Wi-Fi AP settings 
INSIDE THE CAMERA. This is the SSID and password that 
the camera will use when you turn on it’s Wi-Fi radio.  It 
must correspond to the Wi-Fi AP you set in the mobile app.
 
Enter the new AP SSID the camera will respond to 

Enter the new Password for the SSID

Show Password – Tick to show the entered password

Apply on camera will apply the change to settings and shut 
the camera down

Start the Oncall Android App

Tap on Go Live

• 1

9

USING THE ONCALL MOBILE APP