Connecting to the Oncall Wi-Fi Pro Camera
Tap on Wireless Cam
Tethering Details
This dialogue sets up the Wi-Fi AP (access point, or hotspot)
that the mobile will transmit for the Oncall Camera to connect to.
Enter the following details (Default)
AP-SSID: FIRE-CAM (Case Sensitive)
Password: 00000000
Tick “Show password” to check the password entered is correct
Tick Save tether settings. Tap OK
The app will launch the Mobile Phone’s Wi-Fi AP and prompt
the user to turn on the W-Fi on the camera.
Start Wi-Fi on the Camera
Press Wi-Fi button to activate the Wi-Fi radio.
Wi-Fi-on is indicated by:
- Flashing Wi-Fi indicator light (blue)
- Single beep
- Single vibrate
The camera will attempt to connect to the configured Wi-Fi
AP for 3 minutes. If unsuccessful it will automatically turn off t
he Wi-Fi radio to conserve power.
When camera successfully connects to the Wi-Fi AP the
Wi-Fi indicator light stops flashing and stays on
continuously while connected.
• 1
7
Summary of Contents for OnCall Wi-Fi Pro
Page 1: ...M VIEW USER GUIDE ONCALL WI FI PRO FOR ANDROID V 1 0...
Page 18: ...17...
