Operation Instructions
To lock:
1. Turn the DIALS to the opening combination.
2. Press CABLE TRIGGER and pull out the cable
till reaching the desired length.
3. Insert the CABLE HEAD into the LOCKING PORT
and hear a ‘click’ sound.
*
If the batteries are installed, the alarm lock beeps
and the STATUS LIGHT fl ashes once every second.
If the cable is severed, the alarm activates.
4. Now turn and scramble the DIALS to conceal
your combination.
To unlock:
1. Turn the DIALS to the opening combination.
2. Press RELEASE BUTTON to pop out the CABLE HEAD.
3. Retract the CABLE by holding the CABLE HEAD and
pressing the CABLE TRIGGER.
*
CAUTION: the cable retracts quickly and may cause the
CABLE HEAD to whip around if not controlled.
To reset your combination:
1. Make sure the unit is unlocked and the cable is fully retracted.
2. Turn the DIALS to the opening combination.
*
If you are setting the combination for the fi rst time, enter the preset combination 0-0-0-0.
3. Hold the RESET BUTTON and press down the CABLE HEAD.
4. Turn the DIALS to set your own secret number.
5. Pull out the CABLE HEAD while holding down the CABLE TRIGGER.
Your new personal combination is now ready for use. Keep your combination in a safe
and accessible place for future reference.
To install the batteries:
1. Make sure the unit is unlocked and the cable is fully retracted.
2. While pressing and holding down the CABLE TRIGGER,
slide the BATTERY COVER from the lock body.
3. Insert 4 new batteries (LR44).
4. Press and hold down the CABLE TRIGGER again and
slide the BATTERY COVER back into place.
So aktivieren Sie den Bewegungsalarm:
1. To secure and lock this alarm lock by following instruction of ‘To lock’.
2. To set the motion alarm for low sensitivity, press and hold the
MOTION ALARM BUTTON until you hear two beeps. For
high motion sensitivity press and hold the MOTION ALARM BUTTON twice
until you hear three beeps.
3. To change the motion alarm from high sensitivity to low, you must disarm
and unlock it and then reactivate the motion alarm as previously described.
This lock features a two-level motion alarm that you can activate when you lock the unit. When the
motion alarm is active, this unit chirps if it’s picked up or detects movement, such as bumps or vibrations.
If the movement continues or the cable is severed, the alarm sirens for 45 seconds and then rearms itself
to the current sensitivity level.
*
Low sensitivity: The STATUS LIGHT fl ashes twice every second.
The alarm sirens after eight seconds of continuous movement.
High sensitivity: The STATUS LIGHT fl ashes three times every second.
The alarm sirens after four seconds of continuous movement.
CABLE
DIALS
CABLE HEAD
LOCKING PORT
RELEASE BUTTON
RESET BUTTON
STATUS LIGHT
MOTION ALARM
BUTTON
CABLE TRIGGER
BATTERY
COVER
So aktivieren Sie den Bewegungsalarm:
So aktivieren Sie den Bewegungsalarm:
To install the batteries:
To reset your combination:
To reset your combination:
To unlock:
1. Turn the DIALS to the opening combination.
To lock:
Summary of Contents for LOCKNROL
Page 4: ......
