Picture 7
Picture 8
3. Unfolding the Trailer
With the trailer frame lying flat, raise the side panels so that they are vertical. (Picture 9)
Position the roll bar into place until the holes in the side panels and the holes on the ends of roll
bar are line up. (Picture 10)
Insert the knob from outside of the side panel and then into the thread on the end of the roll bar.
Repeat for the other side and fully tighten both knobs. (Picture 10)
Picture 9
Picture 10
4. Attaching the Safety Flag
Insert the flag pole into the flag pocket on the left rear corner of the side panel. Always use
the safety flag. It’s an essential safety device, which can help make you
more visible to motorists and other cyclists.
