215-470LP16 ASSMBLY
6. locate the front and rear delrin spreader bars. Add the both smaller front
spreader bars to either side of the boom assembly add the 8-32 screw
thru the boom and add the nut. Repeat for the rear end of the boom as-
sembly.
7. Find the upper boom section and attach to the open holes of the rear
spreader bars. Carefully bring the nose of the upper boom assembly clos-
er to the nose of the lower boom assembly, slide the center conductor side
of the feed nose assembly into the nose of the upper boom assembly and
add the 8-32 x 3/3 screw and tighten. Add the 8-32 screws to the front
spreader bars, add the nuts and tighten all the hardware.
