M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722
Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com
©2015 M2 Antenna Systems Incoporated
05/28/15
Rev.01
Model ......................................... 222XP30
Frequency Range ....................... 222 To 226 MHz
*
Gain .......................................... 17.4 dBi
Front to back .............................. 21 dB Typical
Beamwidth ............................... E=23° H=25°
Feed type ................................... “T” Match
Feed Impedance. ....................... 50 Ohms Unbalanced
Maximum VSWR ........................ 1.2:1 Typical
Input Connector .......................... “N” Female
Power Handling .......................... 1.5 kW
Boom Length / Dia ...................... 24’ 3” / 1-1/2” To 3/4”
Maximum Element Length .......... 25-7/8”
Turning Radius: .......................... 13” 10”
Stacking Distance ....................... 120” High & 120” Wide
Mast Size .................................... 1-1/2” to 2” Nom.
Wind area / Survival ................... 2.4 Sq. Ft. / 100 MPH
Weight / Ship Wt. ........................ 12 Lbs. / 13 Lbs.
M2 Antenna Systems, Inc.
Model No: 222XP30
FEATURES:
The 222XP30 is the dual polarized version of the famed 222-5WL 15 element Yagi. It is our latest design using
computer techniques to allow maximum gain and patterns in both the horizontal and vertical planes. The vertical elements
have been shifted 1/4 wave length in front of the horizontal set to allow circular polarization if needed. This means four
possible polarization modes with one antenna! Two antennas stacked are a dynamite DX package for FM and SSB and 4
or more are perfect for long haul tropo DXing or moonbounce. The 222XP30 allows you to experience the radio
spectrum’s best tropo frequency without bustin’ your mast or your budget!
Structurally the 222XP30 is sturdy and clean. Elements are 3/16” 6061-T6 aluminum rod mounted through the
boom on UV stabilized “button” insulators. The boom is a full 1-1/2 inch diameter in the middle tapering through two 1-1/4
inch sections to stiff 1 and 3/4 inch tips. The main ‘N’ connectors are O-ring sealed to the CNC machined block and 4:1
balun connectors feature triple seals. The internal module connections are sealed in a space-age silicone gel.
SPECIFICATIONS:
*Subtract 2.14 from dBi for dBd
Summary of Contents for 222XP30
Page 5: ...222XP30 DIMENSION SHEET...
