background image

 

M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722 

Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com 

©2015 M2 Antenna Systems Incoporated 

05/28/15 

Rev.00 

Model  ......................................... 902-14WLC 
Frequency Range ....................... 880 To 915 MHz 

*

Gain .......................................... 21.14 dBi 

Front to back .............................. 24 dB Typical 
Beamwidth   ............................... E=18° H=19° 
Feed type ................................... Folded Dipole 
Feed Impedance. ....................... 50 Ohms Unbalanced

 

Maximum VSWR ........................ 1.2:2 Typical at 902 
Input Connector .......................... “N” Female 

Power Handling .......................... 750 Watts 
Boom Length / Dia ...................... 15’ 4” / 1”, 1-1/4” & 3/4”  
Maximum Element Length .......... 6-3/8” 
Turning Radius: .......................... 100” 
Stacking Distance ....................... 43” High & 43” Wide 
Mast Size .................................... 1-1/2” to 2” Nom. 
Wind area / Survival ................... 1 Sq. Ft. / 100 MPH 
Weight / Ship Wt. ........................ 6 Lbs. / 7 Lbs. 
 

M2 Antenna Systems, Inc. 

Model No: 902-14WLC 

FEATURES: 

 

The 902-14WL is the ultimate in performance and gain. The recently updated computer optimized design produc-

es excellent gain and VSWR across the band. It is ideal for stacking: a quad array will yield almost 25 dBd of real smoking 
antenna gain. Tropo and EME should definitely be on your mind when owning one or more 902-14WLs!  Structurally the 
antenna is rugged, tapered-boom construction featuring 3/16 rod parasitics. A totally weather proof driven dipole design 
means years of trouble free optimum performance. This antenna is a perfect compliment to your VHF-UHF antenna sys-
tem! 

SPECIFICATIONS: 

*Subtract 2.14 from dBi for dBd 

 

 

Summary of Contents for 902-14WLC







Reviews: