Industrial HMI Touch Panel Hardware Manual
M
2
I Corporation 15 / 23
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea,
Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
Chapter 6 Installation
6.1 Installation Requirement
(1) It should be installed within -10 ~ 50°C and 10~80% relative-humidity, otherwise the screen may be changed
or cause malfunction and damage.
(2) Be sure that heat from surrounding equipment does not cause product to exceed its standard operating
temperature.
(3) In order to minimize external mechanical hazards for maintaining anti explosion performance, please control
the mechanical hazards of the surrounding environment
.
6.2 TOPRP Assemble
Insert Process Module to Guide of Rear of Display Module and Mount with Bolts included in Package.
(Bolt Size: M4 X 8L, 0.2N.m)
-10 ~ 50°C, 10~80%
-10 ~ 50°C, 10~80%
IP2X
Enclosure
Front
Rear
IP54
Enclosure
