Disabling a wireless sensor
You can disable single wireless sensor from the RControl Admin portal. Go to the RControl Alarm menu,
RF Zones tab, and choose Enabled=No for that particular sensor.
Deleting all keyfobs and wireless detectors
Press and hold the white button of the RF receiver 3 times for around 10 seconds, until the LED indicator
goes OFF each time. This will delete ALL the paired keyfobs and wireless detectors from the memory.
NOTE:
This procedure will delete
all paired keyfobs and wireless detectors
! To pair the keyfobs
and the wireless detectors again, you should repeat the pairing procedure for each keyfob and
detector.
NOTE:
Before you start the deleting procedure make sure the panel is
DISARMED
.
NOTE:
All the other settings will not be deleted, e.g. Entry/Exit Delay time, Partition configurations etc. If
you want to change those setting you must log in the RControl Admin Portal.
Keypads
The RControl-RF-KB version of the alarm panel supports 1404RKZ and 1555RKZ DSC keypads.
The keypad should be powered from AUX(+) and AUX(-).
Connect terminal R (RED) of the keypad to AUX(+) of the alarm panel.
Connect terminal B (BLK) of the keypad to AUX(-) of the alarm panel.
Connect terminal G (GRN) of the keypad to terminal A of the alarm panel.
Connect terminal Y (YEL) of the keypad to terminal B of the alarm panel.
The default keypad user code of the alarm panels is “1234”.
The user code can be changed by the end user via the RControl mobile application (refer to section
RControl Mobile Application)
RControl Mobile Application
The RControl mobile application is available for Android, iOS and Windows Phones.
With the
RControl
mobile application the end user can:
✓
Monitor the status of the alarm panel
✓
View events log up to one year back in time
✓
Remotely Arm/Disarm the alarm system
The application can be download by scanning the following QR codes:
Initial end user login credentials for the app are provided with the alarm panel.
At the first login, it is strongly recommended that the end user changes the User name and Password and
provides an email for password recovery.
