MARLEY MKII
HIGH PERFORMANCE HEADPHONES AMPLIFIER
REVISION P
R
A – JUNE 2019
Copyright © 2019, M2Tech Srl
33
M2Tech
www.m2tech.biz
When the answer is “NO”, the command is discarded.
7.5. Power Mode and Standby
Depending on the setting of the rear panel switch (Fig. 2, 13) The
MARLEY MKII
can be
powered off by a prolonged push on the front panel’s left button (Fig. 1, 7). After a couple
seconds the unit switches off, reducing its current draw to zero.
It is also possible to put the
MARLEY MKII
in standby by the related key on the remote
control. In this case, the
MARLEY MKII
, while stopping operation as when it is switched off by
the front panel, will keep a minimum current consumption because the main controller, the
Bluetooth
®
receiver and the IR receiver will stay on, waiting for an activation command
from the remote control (another push on the standby key), a power on command from the
app on any coupled Bluetooth
®
source or any action on the front panel button.
Standby mode is indicated by a LED lit on the front panel (Fig. 1, 6) unless otherwise set
by user via the related menu item (Paragraph 7.5.12).
NOTE: Even in the off condition, the
MARLEY MKII
actually draws a very little current
which is virtually negligible.
NOTE: When the power mode switch is set for immediate activation, it is not
possible to completely switch the
MARLEY MKII
off: the prolonged press of the front
panel button will only lead to the standby.
When the power mode switch is set closer to the power socket, the
MARLEY MKII
may
immediately activate when power is applied. Whether or not this actually happens depends
on the “auto-on” setting in the menu.
When the power mode switch is set farther from the power socket, the
MARLEY MKII
may not
immediately activate when power is applied and user must push the front panel button to
switch the
MARLEY MKII
on.