MARLEY MKII
HIGH PERFORMANCE HEADPHONES AMPLIFIER
REVISION P
R
A – JUNE 2019
Copyright © 2019, M2Tech Srl
9
M2Tech
www.m2tech.biz
2. Front Panel
Figure 1
1) Single-ended headphones output.
Connect a headphone provided with 6.35mm (1/4”)
stereo jack.
1) Balanced headphones output.
Connect a headphone provided with 4-pin XLR jack..
3) Display.
Multifunction OLED display. During normal operation, it indicates the listening
level, the selected source, the tone control setting, and the status of mute and cross-feed
(if set). When the menu is accessed, the display shows the selected menu item and its
current value.
4) Encoder.
It allows for accessing and navigating the menu, selecting inputs and setting
the volume. It can be rotated and pushed. Please refer to Chapter 7 for more details.
5) IR receiver.
Aim the remote control to this point to send commands to the
MARLEY MKII
.
6) Standby LED.
When the
MARLEY MKII
is in standby mode, this LED glows to indicate to
the user that the device can be switched on by the included remote control.
7) Power on/power off/mute/menu exit button.
Press this button to switch the
MARLEY
MKII
on when it’s off. When the
MARLEY MKII
is on, a short press will toggle mute, unless the
menu is active: in this case a short press will cause the menu to exit discarding any
configuration change. A more prolonged press while the
MARLEY MKII
is on will cause it to
switch off.