M2Tech
www.m2tech.biz
TOSH
BALANCED LINE PREAMPLIFIER
REVISION P
R
A – JUNE 2023
4. Remote Control
The
TOSH
comes with a versatile remote that allows user to adjust
all of its controls, as well as control other
M2Tech
products from
the Rockstars series.
Note that when a command is sent to the
TOSH
the "AMP" button
flashes green. If, on the other hand, one of the “DAC”, “PHONO”
or “PLAYER” buttons flashes, the
TOSH
will not receive the
command. In this case, press the “AMP” button to select the right
command codes for the
TOSH
.
Below is a brief description of the buttons used for
TOSH
.
Standby button:
allows you to put the TOSH in standby (long
press) and to activate it.
DIM:
display dimming.
AMP:
instructs the remote to send commands using the amplifier
code
MENU:
gives access to the configuration menu.
ESC:
exits the menu without changing the parameters.
Arrow buttons:
allow navigation of the menu.
OK:
exits from the menu with application of the changes made.
VOL+/VOL-:
volume setting.
MUTE:
muting toggle (-20dB).
IN+/IN-:
sequential selection of inputs.
KEYPAD:
the buttons from 1 to 6 allow the direct selection of the
inputs.
Figure 3
Copyright © 2023, M2Tech Srl
13
