M2Tech
www.m2tech.biz
TOSH
BALANCED LINE PREAMPLIFIER
REVISION P
R
A – JUNE 2023
Once the desired menu item is displayed, it is possible to choose the desired value from
the allowed values by turning the encoder or using the "left arrow" and "right arrow" keys
on the remote control.
The new value can then be confirmed with a new short press of the encoder or by pressing
the "OK" button on the remote control.
If, at this point, the user changes his mind and wishes to keep the current value, the menu
can be exited by pressing the left button on the front panel or by pressing the "ESC" key
on the remote control.
Below is a description of all menu items.
7.2.1. BALANCE:
channels balance setting
The
TOSH
is equipped with a function for balancing the relative level of the two channels,
which can be modified in 1/2dB steps between 0 and 6dB towards the left or towards the
right. Being a command to be used very rarely, it has been included in the menu and is not
directly accessible from the remote control or from the front panel.
This feature is applied in real time to give the user the ability to feel the results
immediately.
7.2.2. DISPLAY BACKLIGHT:
display backlight setting
The backlighting of the
TOSH
display can be set to two different modes: AUTO OFF and
ALWAYS ON. In AUTO OFF mode, the display is always off except when a command is
executed. In ALWAYS ON mode, the display is always on.
To set the backlight mode you need to enter the first menu item or use the "DIM" key on
the remote control.
Copyright © 2023, M2Tech Srl
18
SETUP
BALANCE
BALANCE
L <> R
BALANCE
L <__-> R
BALANCE
L <-_> R
