background image

M2Tech

www.m2tech.biz

TOSH

BALANCED LINE PREAMPLIFIER

REVISION P

R

A – JUNE 2023

Warning!

Modifications or alterations not authorized by the manufacturer can invalidate 
compliance with CE regulations and make the appliance no longer suitable for use.
The manufacturer declines all responsibility for damage caused to people or things 
due to improper use or malfunctioning of an appliance subject to unauthorized 
modifications.

This appliance complies with CE standards: CEI EN 55022:2009 Class B (Irradiated Emissions), CEI EN 
55024:1999, CEI EN 55024:A2/2003, CEI EN 55024:IS1/2008 (Radio Frequency Electromagnetic Fields, 
Immunity Test to the 50Hz Magnetic Field and Electrostatic Discharges – ESD).

For correct operation of this appliance, all connections to other appliances in the system must be 
made with all appliances switched off. Failure to comply with this rule may cause damage to the 

TOSH

.

The label above, visible on the shell of the appliance, indicates that the product, at the end of its use, cannot 
be improperly managed as generic waste, but must be treated as an electrical and electronic appliance by an
adequate disposal system in accordance with the regulations by the WEEE directive (or WEEE directive, 
Waste of Electrical and Electronic Equipment).
Once this product is recycled properly, you will avoid potential damage to the environment and human 
health, which could be caused by being disposed of as unsorted municipal waste. Proper reuse of materials 
also reduces waste of resources. For more detailed information on the disposal of this product, please 
contact M2Tech Srl.

WARNING: The information contained in this manual is believed to be reliable and accurate. M2Tech 
reserves the right to change or modify this information at any time, without notice. Customers are 
invited to make sure they are consulting the most recent version of this manual.

Copyright © 2023, M2Tech Srl

3

Summary of Contents for TOSH






























Reviews: