VAN DER GRAAF
VERY LOW NOISE POWER SUPPLY
REVISION P
R
A – JUNE 2014
Copyright © 2014, M2Tech Srl
22
M2Tech
www.m2tech.biz
8. Specifications
Output voltage: ................................. 9V
DC
or 15V
DC
(outputs 1 and 2)
+5V
DC
/+15V
DC
/-15V
DC
(output 3 and 4)
Output current:.................................. 500mA (outputs 1 and 2)
500mA (+5V,
output 3 and 4)
1A (+/-15V,
output 3 and 4)*
Noise:................................................ 2.9uVrms (20Hz-20kHz, A weighted, rated load
Outputs: ............................................ 5.5/2.1mm jacks, positive on tip (outputs 1 and 2)
female 4-poles XLR (outputs 3 and 4)
Input voltage: .................................... 90-260V
AC
, 50/60Hz
Power consumption: ......................... 60VA
Fuse:................................................. slow blow 2.5A
Input:................................................. IEC socket with fuse holder and EMI filter
Output voltage selection: .................. by DIP-switches on back panel
Outputs activation: ............................ sequence set by user
Output reset: ..................................... inverse sequence with regards to activation
Size:.................................................. 200x50x200mm (w x h x d)
Weight............................................... 2.2kg (device only)
3.5kg (packed)
* maximum total current available on each of the two outputs rails is 1,5A
