62
Power
You can set up to show M
3
‟s battery status and to be turned off while it is not used for a
while.
Battery
Check out M3
„s battery status.
1. Select Go to Start>Setting>Control Panel.
2. Open the power icon and select the battery tap. The battery tap contains general
information on the battery status.
3. There are 3 different battery states as follows:
High: Battery power is sufficient.
Mid: Battery power is low. It is advisable to charge the battery.
Low: Battery power is very low. In order to protect important data, turn off M
3
and charge again.
Power Turn off
If the user idle state has been set, the LCD system will be shut down when there is no
input activities from the user. If the system idle
state has been set, the system‟s
peripheral devices will enter into the power saving mode. (LAN card, Camera, External
extension memory, etc)
You can turn off the power of M
3
so as to save the battery power and prevent
unauthorized use of other people. To set up automatic shut down while M
3
is not used:
1. Select Go to Start>Setting>Control Panel.
2. Open the power icon and select the power shut-down tap.
3.
If you use the battery, click “Power shut down after idle time while using
battery”check box and set up the idle time applied to shut down of M
3
4.
If you use the external power, click “after idle time while using external
power”check box and set up the idle time applied to shut down of M
3
