Safety
SAFETY AND WARNINGS: CHOKING HAZARD - The Micro
+
3D Printer and its consumables may include small parts that may constitute a
choking hazard; additionally, these products may be used to manufacture objects that may themselves constitute a choking hazard. The
Micro
+
3D Printer is NOT A TOY; children under the age of 14 should use the product under adult supervision. CAUTION! The printhead,
exposed nozzle, extruded plastic, and areas near the nozzle may be extremely hot. Keep fingers away from the printhead and extruded
material unless it has been unplugged for at least 10 minutes. Use M3D’s products only as intended, as described by the user manual
and/or this agreement and/or described within the software. Use M3D’s products in a well-ventilated area. Do not leave M3D’s products
running while unattended. PRECAUTION - None of components of The Micro
+
3D Printer or parts printed from it or using M3D filaments
are certified for food safety nor should they be regarded as food-safe therefore should not come in contact with the mouth or
foods/liquids that will be ingested by humans or animals. PRECAUTION - None of components of The Micro
+
3D Printer or parts printed
from it should be used for medical applications, such as but not limited to implantation, drug delivery, or ingestion. PRECAUTION - If any
allergy develops as a result of direct or indirect contact using M3D’s products, or from the 3D printed objects, discontinue use
immediately. MAINTENANCE - After extended or improper use, the nozzle and/or its cover may need to be replaced or cleaned; the print
bed and/or the Buildtak sheets covering it may need to be replaced; the extruder may need to be purged or cleaned; and the filaments
may need to be purged or replaced. REPAIR/SERVICE: Repair/Service terms were provided to the purchasing customer in the customer
purchase agreement. This agreement may be found by logging into their user account at www.printm3d.com. All parts of the
Repair/Service section apply to the purchasing customer / first end-user and are non-transferrable. RETURNS: Return terms were
provided to the purchasing customer in the customer purchase agreement. This agreement may be found by logging into their user
account at www.printm3d.com. All parts of the Repair/Service section apply to the purchasing customer / first end-user and are
non-transferrable. All software sales or licenses are final, non-refundable, and/or non-transferrable.
PART REMOVAL: During part removal be mindful of your fingers when using sharp objects. M3D recommends removing the bed from the
printer when possible before attempting to remove a 3D printed object. For tips on removing 3D printed objects see the support page at
http://www.printM3D.com/support
.
