3
shields. Everyday glasses may have impact
resistant lenses, but they are not safety glasses.
Following this rule will reduce the risk of eye
injury.
12) Protect your lungs. Wear a face or dust mask
if the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
13) Protect your hearing. Wear hearing protection
during extended periods of operation.
Following this rule will reduce the risk of
serious person injury.
4.
POWER TOOL USE AND CARE
1) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
2) Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3) Disconnect the plug from the power source
or come away the battery box from the power
tool before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
4) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
5) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts,
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
7) Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed. Use
of the power tool for operations different form
intended could result in a hazardous situation.
8) Save these instructions. Refer to them
frequently and use them to instruct others
who may use this tool. If you lend this tool
to someone else, also lend them these
instructions.
5.
SERVICE
1)
Have your power tool serviced by a
qualified repair person.
2)
When servicing a power tool, use only
identical replacement parts.
3)
Follow instructions in the Maintenance
section of this manual. Use of
unauthorized parts or failure to follow
Maintenance instructions may create a risk
of shock or injury.
ALL OF SAFETY RULES
CURRENT SAFETY WARNING
1. This power tool is intended to function as
a grinder tool. Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
2. Do not recommend use this power tool
operations as sander, wire brush and so on.
Used this power tool do besides appointed
function will cause hazards and personal
injuries.
3. Do not use accessories which are not
specifically designed and recommended
by the tool manufacturer. Just because the
accessory can be attached to your power tool,
it does not assure safe operation.
4. The rated speed of the accessory must be
at least equal to the maximum speed marked
on the power tool. Accessories running faster
than their rated speed can fly apart.
5. The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or
controlled.
6. The arbor size of wheels, flanges, backing
pads or any other accessory must properly fit
the spindle of the power tool. Accessories with
arbor holes that do not match the
