M7 DD1813, Manual

2

   GENERAL SAFETY RULES    

       WARNING: 

Read all instructions. Failure to 

follow all instructions listed below may result in 

electric shock, fire and/or serious personal injury. 
The term “power tool” in all of the warnings listed 

below refers to your mains operated (corded) 

power tool or battery operated (cordless) power 

tool.

SAVE THESE INSTRUCTIONS

1. WORK AREA SAFETY

1)  Keep workplace clean and well lit. Cluttered 

and dark workplaces invite accidents.

2)  Do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases or dust. Power tools 

create sparks which may ignite the dust or 

fumes.

3)  Keep children and bystanders away while 

operating a power tool. Distractions can cause 

you to lose control.

2. ELECTRICAL SAFETY

1)  Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools. Unmodified plugs and matching outlets 

will reduce risk of electric shock.

2)  Avoid body contact with earthed or grounded 

surfaces such as conduits, radiators, and 

refrigerators. There is an increased risk 

of electric shock if your body is earthed or 

grounded.

3)  Do not expose power tools to rain or wet 

conditions. Water entering a power tool will 

increase the risk of electric shock.

4)  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat oil, sharp edges or 

moving parts. Damaged or entangled cords 

increase the risk of electric shock.

5)  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. Use of a 

cord suitable for outdoor use reduces the risk of 

electric shock.

3. PERSONAL SAFETY

1)   Stay alert, watch what you are doing and 

use common sense when operating a power 

tool. Do not use a power tool while you are 

tired or under the influence of drugs, alcohol 

or medication. A moment of inattention while 

operating power tools may result in serious 

personal injury.

2)   Use safety equipment. Always wear eye 

protection. Safety equipment such as dust 

mask, non- skid safety shoes, hard hat, 

or hearing protection used for appropriate 

2. TOOL SPECIFICATIONS

Model

DD1813

DH1826

Motor(V)

20 

20 

No-load speed(/min)LO

0-350 

0-350 

No-load speed(/min)HI

0-1300 

0-1300 

Impact rate(/min)LO

NO

0-6300

Impact rate(/min)HI

NO

0-23400

Max torque (N.m)

52

67

Max clutch (mm)

13

13

Drill weight (kg)

2.5

2.6

Battery type

Lithium-Ion

Lithium-Ion

Charger input(V )

100-240V

100~240V

Battery capacity(Ah)

1.3

2.6

Allowable temperature range (

o

C

)

0-40

°

0-40

°

NOTE: 

Due to               continuing program of development, the specifications herein are subject of 

change without prior notice.