background image

Technical Details

Safety Precautions

Item No.

Cord Type

Sectional Number of Core

Cable Length

Volt

SA-1015

H07RN-F

1.5 mm

2

3

15m

230V

SA-1020

H07RN-F

1.5 mm

2

3

20m

230V

SA-1115

H07RN-F

2.5 mm

2

3

15m

230V

Item No.

Full Reeled Load

Full Extended Load 

Net Weight

SA-1015

1000 Watts

2000 Watts

5.8 kg

SA-1020

1000 Watts

2000 Watts

6.2 kg

SA-1115

1600 Watts

3200 Watts

6.8 kg

1.Ensure that only the qualified electrician can install/service this cable reel. 

And it must not be used by children or unskilled persons.

2.Ensure that power supply voltage does not exceed maximum voltage rating of 

reel.

3.Ensure that reel is properly installed before connecting to power supply.

4.Ensure that all electrical power is removed form reel before servicing.

5.Check for frayed and broken wires before each use.

6.When pull electrical cable from the reel always grasp the electrical cable 

itself, not the work device.

7.Remove power form the reel immediately when any malfunction occurs.

8.Never remove, tamper with or cut the safety devices fitted by the manufac-

ture.

9.Do not use the reel in damp or wet conditions. Keep the work area is clean. 

Avoid put in sundries reel.

2

Summary of Contents for SA-1015





























Reviews: