18
Once you hear and see the above then secure the cover
plates.
Leave the Hoverbike Drone until the Pixhawk flashes
green (acquires gpS satellites).
Arm for flight
yOuR hOvERbikE DRONE iS NOw ARmED AND READy tO fly!
hold the arming button
on the side until the
button lights up solid red
and the motors sing out a
tune, the motors should
then remain quiet.
hold the yaw (left stick of
your transmitter) fully to
the right and down until
you hear a long tone from
the pixhawk buzzer and
the pixhawk light goes
solid green.
pixhawk:
Arming button:
motors:
pixhawk:
Contents
After connecting the batteries you should hear the mo-
tors start beeping, quickly followed by a tune from the
pixhawk buzzer. the motors will continue to sound and
the arming button light will flash red.
Arming button:
pixhawk:
motors:
Leave the drone whilst the Pixhawk flashes red and blue,
it should not be disrupted at this stage (after connecting
the battery).
pixhawk:
Summary of Contents for DRONE 3
Page 1: ...DRONE 3 A quick start guide M V...
Page 2: ......
Page 23: ......
Page 24: ...M V WWW HOVER BIKE COM...
