Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 56 -
3. The control panel assembly is now free to be removed.
4. Turn the control panel to the rear side.
5. Loosen the four screws (Ø3x5-Pan) on the NC6100-UI
board.
6. Loosen the screw (Ø3x8-Round Head) on the NC6100-UI
board.
7. Release the FCC cable of LCD display from the
connector.
8. The NC6100-UI board is now free to be removed.
5.3.2.2 Keypads
1. Pull out the keypads from the control panel.