background image

39

Function 2:

 TONE Search Scanning

In operating situations where you don’t know the CTCSS/DCS tone being used by
another station or stations, you can command the radio to listen to the incoming signal
and scan in search of the tone being used.

Enter Menu 31

st

/32

nd

 to start CTCSS/DCS searching.

If the Tone scan feature does not detect a tone or code, it will continue to scan
indefinitely. When this happens, it may be that the other station is not sending any tone.
You can press 

PTT

 key to halt the scan at any time.

You also can press 

MONI

 key during Tone scanning to listen to the (muted) signal from

the other station. When you release the 

MONI

 key, Tone scanning will resume.

Tone Scanning works either in the VFO or MR modes.

Function 3:

 TONE Calling (1750Hz)

If the repeaters in your country require a 1750Hz burst tone for access (typically in
Europe), you can press and hold 

CALL

 key for 2s and transmitter will automatically be

activated, and a 1750Hz audio tone will be superimposed on the carrier. Once access
to the repeater has been gained, you may release 

CALL

 and use 

PTT

 key for activating

the transmitter.

22) VFO Step setting (STEP---MENU 29)

Functions:

 setting of the synthesizer steps

Enter Menu 29

th

 to set VFO step.

Available Values: 5/6.25/10/12.5/25/50/100 kHz

38

DCS CODE

023

025

026

031

032

036

043

047

050

051

053

054

065

071

072

073

074

114

115

116

122

125

131

132

134

143

145

152

155

156

162

165

172

174

205

212

223

225

226

243

244

245

246

251

252

255

261

263

265

266

271

274

306

311

315

325

331

332

343

346

351

356

364

365

371

411

412

413

423

431

432

445

446

452

454

455

462

464

465

466

503

506

516

523

526

532

546

565

606

612

624

627

631

632

645

654

662

664

703

712

723

731

732

734

743

754

-

-

-

-

-

-

Summary of Contents for AHT-9-UV









































































Reviews: